Total Pageviews

Sunday, 26 March 2017

VMA Simple Spectrum Analyser - Download page

VMA Simple Spectrum Analyser
Download Page


For ADF4350, ADF4351 and MAX2870 based devices, please click here:


For Siglent SSA3021X or SSA3032X spectrum analyser, please click here:



For Rohde & Schwarz CRTU or CMU200 spectrum analyser, please click here:


18 comments:

  1. Hello
    I bought an LTDZ_35-4400M_Spectrum and I find your program very interesting, is this equipment compatible?
    Thank you.

    ReplyDelete
  2. Yes! Please take a look at my blog and do read the manual.

    Kind regards,
    Vitor

    ReplyDelete
  3. While running your program it asks for a activation code, where could I find one?

    ReplyDelete
    Replies
    1. Hello.
      You need to run the software, generate a SYSTEM CODE based on the MAC Address of a physical network device (do not use a virtual network device) and send it to me: v m a AT n o r c a m DOT p t.
      The instructions are visible on the download page and in the user manual, as well. I think my email is shown inside the software, too!

      Kind regards,
      Vitor

      Delete
  4. I have installed you VMA Simple Spectrum Analyser for ADF4351 on windows 7. I have taken the activation code from you and now the GUI is visible to me but soon I push the START button the hole GUI hang and there is no output on the screen.


    please help

    ReplyDelete
    Replies
    1. You need to select your device in the SETUP tab. If you have a D6 or a LTDZ you need to explicitly select it, otherwise the software will hang. These devices are not 100% compatible with the SMA/NWT by BG7TBL!

      Delete
  5. This comment has been removed by the author.

    ReplyDelete
  6. Fantastic software, I'm really pleased as it is so easy to use. I was ready to bin my cheap 4.4ghz spectrum analyser as the software that came with it didn't work. Now I can use it to get my QO-100 uplink going on a budget.
    Thankyou for writing this, I will be recommending your software to all my radio amateur friends as several of us have these devices....

    ReplyDelete
  7. Hi does this software work with £26.86 30%OFF | Spectrum Signal Source Spectrum Analyzer LTDZ MA2870 23.5-6000Mhz
    https://a.aliexpress.com/_BPcffe?

    ReplyDelete
    Replies
    1. No, my software will NOT work with this device!

      Delete
  8. This comment has been removed by the author.

    ReplyDelete
  9. i had been using my LTDZ_35-4400M_Spectrum with the software and i paused for a bit , i had a permanent code, now i've restarted with the same device and key and the software just doesnt work at all, it ask if to remove code, says it cant find the device with MAC, but the NWT software works , can anyone assist with any suggestions. i am using the latest software

    ReplyDelete
    Replies
    1. Please just send me and email with your SYSTEM CODE and you will promptly receive a new ACTIVATION CODE.

      Delete
  10. Hi, I would like to use LTDZ_35-4400M Spectrum Analyzer board for my special project. Question is if exist some info about communication protocol on USB (serial port). Can I find some document with info about this communication? Thank you Jiri

    ReplyDelete
    Replies
    1. You can read all specs of the communication protocol in the last chapter of the WinNWT or LinNWT user manual.
      I cannot provide you this document, because I don't own the intellectual property.
      However, a good Google search should help you.

      Delete
  11. Hello Victor, Ireceived a lot of yars ago a code but I have changed my PC and now don't works.

    73 de IZ1QXJ
    Antonio

    ReplyDelete